|1.Main Features of Samll Sheet metal NC Hydraulic Press Break With Automatic Positioning Control WC67Y-125T 5000MM|
| ● Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.
● Adopt integrated hydraulic system, more reliable and easy for maintenance. and the hydraulic system from Bosch-Rexroth, Germany,
● Mechanical synchronous meahanism and the complex compensation are designed so as to raise the workpieces precision.
● The stroke and distance of the backgauge is adjusted by the motor and is well adjusted by hand,the adjustment is displayed by E21.
● Inch, single mode being designed for the machine and reversing and maintain time can be controlled by the time relays.
● Safe fence and the electric interlocker have been designed for the machine to ensure the operation safety.
|2.Hydraulic System of NC Press Brake|
| ● ydraulic system is from Bosch -Rexroth,Germany.
● Adopt integrated hydraulic control system, more reliable and easy for maintenance.
● Reduced noise: the particular installation choices allow to obtain especially moderate noise levels both on machines of average capacity
● Overload overflow protection is outfitted to hydraulic system,which can assure no leakage,and the oil level can be read or seen directly.
● The hydraulic system is made in compliance with current regulations (Directive 98/37 EC).
|3.Safety Equipment of Metal Sheet Press Brake|
| ● Safety Standards(2006/42/EC):
● EN 12622:2009 + A1:2013
● EN ISO 12100:2010
● EN 60204-1:2006+A1:2009
● Front finger Protection(Safety light curtain)
● South Korea Kacon Foot Switch(Level 4 of safety)
● Back metal safe fence with CE standards
● Safety relay with Monitor the pedal switch and safety protection
|4.Controller of Press Brake|
| ● Monochrome LCD Box Panel.
● Integral factor programmable freely
● Automatic positioning control
● Spindle allowance offset
● Internal time relay
● Stock counter
● Backgauge position display, resolution in 0.05mm
|5.Ram and Die(ONE SET OF BENDING DIE IS FREE)|
| ● Up punching dies will be cut into section as the requirement as below
● Fractional set:25mm 30mm 40mm 45mm 50mm 170mm 100mm right 100mm left.
● The equipped standard Dies, special non-standard mold is available under client's requirement according to real workpiece situation.
● The Machine By E21 NC Control With the point of programming, can automatically adjustable the backgauge size and bending depth;
|TECHNICAL FEATURES NC hydraulic press brake WC67Y-125T 5000MM|
|1||Type||NC hydraulic press brake|
|2||Control System||Estun E21 nc controller|
|4||Working table length||5000mm|
|9||Max opening height||380mm|
|10||Slipper Stroke adjustment||100mm|
|12||Main motor power||7.5KW|
|15||Option 1||Estun E200 NC CONTROL|
|Option 2||DELEM DA41 CNC control|